|
In Reply to: Re: Adjusting the clock-in dash CD posted by Mel on April 07, 2002 at 21:58:23:
This was originally posted by MikeP some time ago.
1. Press and hold the MODE button until TA VOLUME is displayed.
2. Repeatedly press & release the MODE button until CLOCK SET is displayed.
3. While the hour format is flashing, use the seek up/down keys to select
either 12 or 24 hour format.
4. Press & release the MODE button.
5. If the 12 hour format has been selected, use the # key to select AM or PM as
appropriate.
6. Using the keypad, enter the correct time. It should be noted that the clock
time must be entered as four digits e.g. 0325 or 1525, when in 12 or 24 hour
format.
7. To exit clock setting procedure, press & hold the MODE key until the display
reverts to audio mode.