The Ultra Garage Forum, Garage Makeover and more. Garage Cabinets, Tool Boxes & Chests, Floor Cover

What cabinets and lockers are you guys using? - Johnboy 2006-06-27 15:40:56 (2164 views) (20963 thread views)
- Lista (nt) - Steve ©⁹⁵ 2006-07-11 12:12:58 (1504 views)
  - high $$$ stuff, Let's see pics (nt) - Dean 2006-08-13 21:06:29 (1515 views)
- RSI Estate from Lowes (pic) - sayemthree 2006-07-08 01:16:04 (7994 views)
- Sears Craftsman - JohnC 2006-06-27 16:45:55 (6400 views)
  - Re: Sears Craftsman (url) - Clancy 2007-05-11 15:57:47 (1539 views)
  - thanks for the reply. I'll check out the Craftsman - johnboy 2006-06-28 15:54:08 (1328 views)
    - Lowes/Home Depot white basic (nt) - Tomcat 2006-06-30 09:34:59 (3961 views)

What's the best garage floor coating? - flexstar 2006-07-27 22:05:40 (37995 views) (144268 thread views)
- Re: What's the best garage floor coating? (url) - adrienne 2010-04-19 13:28:16 (4303 views)
  - Re: What's the best garage floor coating? - CarGuy1 2010-08-25 22:00:04 (1580 views)
- Re: What's the best garage floor coating? - Mr. Concrete 2008-06-11 14:53:29 (10629 views)
- Just Did U Coat It - bmwpc 2007-02-07 16:09:12 (17922 views)
  - Re: Just Did U Coat It - me 2009-10-10 12:04:11 (3129 views)
- Re: What's the best garage floor coating? - bmwpc 2007-02-07 15:54:28 (8908 views)
- Re: What's the best garage floor coating? (url) - JohnnyQuest 2006-08-07 09:38:27 (10051 views)
  - Re: What's the best garage floor coating? - Pappy 2007-12-31 22:40:51 (5173 views)
- Rustoleum solvent based clear coat is nice - workhurts 2006-08-05 12:30:24 (12253 views)
- Acid stained concrete with clear coat (pic) - Dean 2006-08-01 22:27:59 (10083 views)
  - Re: Acid stained concrete with clear coat (url) - Mr. Concrete 2008-06-11 15:01:10 (5164 views)
  - Re: Acid stained concrete with clear coat - GregM 2007-09-18 17:47:20 (4420 views)
  - Re: Acid stained concrete with clear coat - mismail1 2007-07-20 15:08:32 (4324 views)
  - What is the clearcoat made of? - Tomcat 2006-08-02 13:59:56 (4416 views)
    - not sure, but it's solvent based (nt) - Dean 2006-08-02 21:45:13 (3731 views)
  - I considered that. good idea. looks good, (nt) - nice! 2006-08-01 23:06:34 (3795 views)
- you could try the colored concrete and then seal - sayemthree 2006-07-30 17:44:22 (3875 views)
- Re: What's the best garage floor coating? - JimLev 2006-07-27 22:53:47 (7404 views)
  - Re: What's the best garage floor coating? - flexstar 2006-07-29 15:16:08 (5590 views)
    - Re: What's the best garage floor coating? (url) - rogerbarry 2007-10-25 18:57:14 (4217 views)
    - Re: What's the best garage floor coating? - mgm2003 2006-09-22 08:30:53 (12032 views)
      - Re: What's the best garage floor coating? (url) - Vette Racer 2009-02-06 15:47:18 (3079 views)
      - U-Coat-It may be a better product,, looks like (m) (url) - JimLev 2006-09-25 08:51:16 (13292 views)
    - Haven't had any chipping problems yet (m) - JimLev 2006-07-30 12:51:06 (4880 views)
      - Re: Haven't had any chipping problems yet (m) - flexstar 2006-07-30 22:01:11 (3976 views)
        Re: Haven't had any chipping problems yet (m) (url) - JimLev 2006-07-31 08:16:36 (4442 views)
        I etched my new cement with Muriatic acid - Tomcat 2006-08-07 10:04:30 (6953 views)
        That will do a great job at etching the floor (m) - JimLev 2006-08-07 10:40:59 (4724 views)

------ Advertisement. Support us by joining the Roadfly Inner Circle to optionally hide this banner ad. ------

Can any one suggest Automotive Car Lift? - kristi.amy 2008-01-14 09:16:26 (898 views) (1424 thread views)
- Re: Can any one suggest Automotive Car Lift? (nt) (url) - Soniya 2010-08-18 06:23:22 (109 views)
- AllAmericanLifts.com (url) - Woody 2008-04-15 15:27:40 (819 views)

My garage transformation (m-very long) (pic) - JimLev 2006-06-13 14:00:28 (14070 views) (33293 thread views)
- Just noticed all my pics were gone, Here they R (m (nt) - JimLev 2009-11-09 21:12:54 (464 views)
  - Try this again, I hit the enter key by mistake (m (pic) - JimLev 2009-11-09 21:32:53 (769 views)
- Clear Coat?? - KD 2008-09-03 01:13:14 (1095 views)
  - Re: Clear Coat?? - Sunny 2009-09-01 09:29:20 (411 views)
  - Re: Clear Coat?? - JimLev 2008-09-11 00:34:05 (910 views)
- Re: My garage transformation (m-very long) (nt) - geane cempt 2008-04-28 07:34:39 (982 views)
- How's the floor coating holding up? - z3_hack 2007-05-03 08:19:58 (1380 views)
  - Mine is holding up fine, no lifting at all (m) - English Muffins! 2007-05-04 00:24:44 (1404 views)
    - Re: Mine is holding up fine, no lifting at all (m) - z3_hack 2007-05-04 09:53:14 (1120 views)
    - HA, forgot to change the Author back to me. I was( - JimLev 2007-05-04 00:28:35 (978 views)
- what did you do to insulate/trim-out the lower - srm 2006-07-21 11:06:31 (1525 views)
  - I bought 1" thick foam insulation panels, (m) (url) (pic) - JimLev 2006-07-21 19:11:13 (7599 views)
    - Re: I bought 1 thick foam insulation panels, (m) - kevin 2006-11-25 00:07:59 (1739 views)
      - To keep the cold out and the heat in (m) - JimLev 2006-11-25 00:45:56 (1405 views)
        27°F outside this morning, the garage is 58°F (m) - JimLev 2006-12-06 08:34:54 (1202 views)
- Really nice! (nt) - JohnnyQuest 2006-06-28 20:21:25 (1300 views)
- Cool! (nt) - Johnboy 2006-06-27 15:50:58 (1091 views)
- Love the garage pics, + I have same vac. :o) (nt) - ultamte 2006-06-20 09:18:09 (1634 views)
  - Re: Love the garage pics, + I have same vac. :o) (nt) - jake 2008-05-12 22:33:35 (795 views)
  - Thanks. The wife bought a new vac so this is now(m - JimLev 2006-06-20 20:42:05 (1245 views)
- Correction....Can't drive on it for 7 days, not 30 (nt) - JimLev 2006-06-15 07:28:04 (1336 views)
- Nice garage. Cold start boiler a plus ($$ saved) (nt) - jef ©⁸⁵ 2006-06-13 19:57:32 (1647 views)

------ Advertisement. Support us by joining the Roadfly Inner Circle to optionally hide this banner ad. ------

Will epoxy stand up to a 4-post lift? - TTBear ©⁹⁵ 2006-07-28 12:21:06 (3194 views) (24221 thread views)
- All epoxy finishes will eventually fail - Dean 2006-08-05 02:02:28 (2269 views)
  - Re: All epoxy finishes will eventually fail - Ernie Soliz 2006-09-06 18:19:33 (2055 views)
    - Same problem here - OKV8iT 2006-09-07 14:35:58 (1784 views)
- My 4-pole used to "walks" ever so slightly - Tomcat 2006-08-02 13:51:58 (1927 views)
  - Thanks, Tom - can you tell me....... - TTBear ©⁹⁵ 2006-08-03 15:10:31 (1310 views)
    - Two part epoxy (Valspar brand)...no flakes... (pic) - Tomcat 2006-08-04 08:39:44 (3442 views)
      - Thanks! Great work! (nt) - TTBear ©⁹⁵ 2006-08-04 14:55:16 (1116 views)
- epoxy is often only as good as the - sayemthree 2006-07-30 17:39:45 (1721 views)
  - Salt isn't a problem, my wifes side of the (m) - JimLev 2006-07-30 21:01:48 (1484 views)
    - Nope - not bolted to the floor. Rolls around..... - TTBear ©⁹⁵ 2006-07-30 22:42:05 (1406 views)
      - Yes sir! (nt) - GH 2008-10-26 18:39:00 (567 views)
      - I have caster'd mine around...no problems - Tomcat 2006-08-02 13:54:10 (1208 views)
      - Re: Nope - not bolted to the floor. Rolls around..... - JimLev 2006-07-31 08:27:31 (1219 views)
        Link...6th down on this page - Tomcat 2006-08-02 13:56:54 (1350 views)
        Thanks for the info - here's a link... (url) - TTBear ©⁹⁵ 2006-07-31 09:57:25 (1943 views)
        4 post car lifts / Benco car lifts - Scott 2006-08-19 15:46:42 (4824 views)
        Re: 4 post car lifts / Benco car lifts (url) - North American Auto Equipment 2008-08-30 13:14:18 (1147 views)
        Re: 4 post car lifts / Benco car lifts - Pete 2008-10-30 18:26:13 (733 views)
        I used Greg Smith! (nt) - Tomcat 2006-08-02 13:57:56 (1586 views)
        Looks good, I watched the video. If you are (m) - JimLev 2006-07-31 15:05:06 (1473 views)
        Great tip - I'll give it a whirl. Thanks! - TTBear ©⁹⁵ 2006-08-01 13:52:38 (1191 views)
        I'm satisfied with 9' ceilings - Tomcat 2008-10-03 08:59:14 (658 views)

Recommendations on garage cabinets ? (nt) - Useless Message Poster 2006-12-12 09:43:41 (1715 views) (10966 thread views)
- Re: Recommendations on garage cabinets ? (url) - hdunce 2007-02-20 22:04:00 (1587 views)
- I'm going with these. Very nice look and feel (url) - Useless Message Poster 2006-12-15 13:46:49 (2005 views)
  - I bought the large cabinets for $179.00 @ d store. (nt) - RevHigh 2006-12-22 11:23:48 (1917 views)
    - What is "d-store" ? Sears ? (nt) - Useless Message Poster 2006-12-26 12:43:44 (1070 views)
      - yes Sears store. I also just bought the Gladiator - RevHigh 2006-12-27 17:21:06 (1254 views)
        Yes, I will buy them at the store too. - Useless Message Poster 2006-12-28 10:15:51 (1125 views)
        Several people around me have done the same - RevHigh 2006-12-28 11:48:55 (1095 views)
        That sounds like fun.... - RevHigh 2006-12-28 10:35:26 (914 views)
        www.listaintl.com (nt) - tjm3 2006-12-27 20:24:15 (1427 views)
        Re: www.listaintl.com - tjm3 2006-12-28 22:22:49 (1092 views)
        Yes, but I don't have the"ultra" money. - Useless Message Poster 2006-12-29 09:40:17 (1033 views)
        Re: Yes, but I don't have theultra money. - Mike moore 2009-07-17 11:01:51 (440 views)
        I put one of the cabinets together this weekend... - RevHigh 2007-01-02 08:48:13 (1129 views)
        Home center cabinets - Tomcat 2007-01-12 08:47:55 (1173 views)
        Re: Home center cabinets - Ben 2007-12-17 13:38:15 (834 views)

need help picking garage lights (url) - yan 2007-03-29 02:51:28 (1316 views) (3228 thread views)
- Use mirrored finished reflectors if possible - CheckSix 2008-12-16 20:56:08 (553 views)
- Re: need help picking garage lights - Tomcat 2007-03-30 10:52:40 (1007 views)
  - Re: need help picking garage lights - Tomcat 2007-03-30 10:56:44 (992 views)
    - Re: need help picking garage lights - Tonygearbrain 2009-06-23 01:24:36 (379 views)
    - Yan...where are you located? - montanamike 2007-04-07 12:45:11 (790 views)

Ultimate Car Lift (url) - Revlover 2008-10-27 10:59:55 (1243 views) (1681 thread views)
- Re: Ultimate Car Lift (url) - rsunter ©⁵² 2009-06-10 13:05:16 (734 views)

Can any one suggest Automotive Car Lift? - menny 2008-01-19 14:02:30 (968 views) (2584 thread views)
- Re: Can any one suggest Automotive Car Lift? (url) - rsunter ©⁵² 2009-06-10 13:00:35 (494 views)
- All American Lifts (allamericanlifts.com) (url) - Woody 2008-02-26 16:56:01 (1100 views)
- 4 pole Direct lift - Tomcat 2008-02-12 15:12:47 (1096 views)

chrysler transmission - jarhead132 2009-05-01 21:39:04 (391 views) (402 thread views)

Life Hammer - wesley 2008-12-24 23:05:19 (504 views) (810 thread views)
- Re: Life Hammer (url) - paulmartin143 2008-12-24 23:10:44 (515 views)

Just bought new place n looking to upgrade floorin - Thomas Crown 2006-07-10 22:21:59 (1365 views) (5736 thread views)
- 2-part solvent based epoxy - Tomcat 2006-07-11 12:08:03 (1301 views)
  - I meant epoxy when I wrote "paint" - Thomas Crown 2006-07-11 18:18:13 (1087 views)
    - Poly tiles...in my opinion - Tomcat 2006-07-14 13:21:25 (1359 views)
  - I used a two part epoxy. unless the concrete is - sayemthree 2006-07-11 16:10:37 (2016 views)
    - Re: I used a two part epoxy. unless the concrete is - Hurrol Goodwin 2008-07-28 13:37:24 (854 views)
      - I used Valspar...but I the packaging - Tomcat 2008-10-03 09:05:38 (604 views)

finally done. (pic) - sayemthree 2006-07-03 18:47:39 (5164 views) (14082 thread views)
- Perfect! Except..... - MnTim 2006-07-22 02:04:41 (1958 views)
  - Looks OK, but it needs some cars and grease. (nt) - Gordopost 2008-08-21 16:21:09 (763 views)
  - yep - and the foor is not reversable - BUT..... - sayemthree 2006-07-22 03:08:11 (1605 views)
    - oops ..... the DOOR is not reversable - BUT..... (nt) - sayemthree 2006-10-20 02:48:25 (985 views)
- Very nice!! What city are you again? - Thomas Crown 2006-07-10 22:25:53 (1157 views)
  - i am out - sayemthree 2006-07-11 01:45:03 (1232 views)
    - ahhh..San Dimas ish? Nice grarage btw. (nt) - ezsce46 2006-07-21 18:07:13 (1022 views)
    - I am at Yorba Linda off 57 at Imperial Hwy. - Thomas Crown 2006-07-11 11:36:17 (913 views)
- Wow, really nice. - JohnnyQuest 2006-07-09 20:14:01 (1065 views)
- where does the door by the tool box go? wash bay? - krc328ic 2006-07-05 12:10:01 (1185 views)
  - thanks - it goes to the outside side yard..... - sayemthree 2006-07-05 12:59:00 (1121 views)
- you should get iDrive opener for smaller door (url) - em3 2006-07-03 23:43:36 (1581 views)
  - Re: you should get iDrive opener for smaller door - bigblock 2006-07-27 09:26:16 (1221 views)
  - thats cool - but BMW should sue them over the use - sayemthree 2006-07-04 01:36:53 (1311 views)
    - Re: thats cool - but BMW should sue them over the use - Hawk911 2006-07-12 09:32:17 (1157 views)
      - i heard that too on a garage board - I didnt - sayemthree 2006-07-13 01:41:23 (1175 views)

7' high garage door and 16' ceiling? - goatboy 2006-07-18 06:32:39 (3679 views) (8889 thread views)
- install garage door - topak 2008-05-09 17:23:09 (1046 views)
- hey Goat! we have a 7' door, and probably 12' - Jeff * 98NY 2007-01-16 10:32:50 (1493 views)
  - I'm thinking about 8' high doors ,but... - goatboy 2007-03-24 23:01:43 (1778 views)
- Re: 7' high garage door and 16' ceiling? - Tomcat 2006-07-19 13:22:24 (1706 views)
  - good idea - goatboy 2006-07-19 20:55:27 (1358 views)
    - Re: good idea - tjankovs 2007-04-16 14:14:54 (967 views)
      - like the cam on a Nautilus machine? (nt) - goatboy 2007-05-04 22:13:42 (938 views)

Solvent-based vs Water-based Epoxy (url) - ///MJS 2006-07-07 20:26:47 (4744 views) (7155 thread views)
- Alrighty then...Anyone know how Epoxy-Seal - ///MJS 2006-07-25 18:21:53 (2480 views)
  - Re: Alrighty then...Anyone know how Epoxy-Seal (url) - I do! 2008-01-29 03:50:45 (1240 views)

Garage cabinets' (nt) - Scott Andrews 2006-08-26 19:24:03 (1499 views) (2932 thread views)
- Let's try that again - Scott Andrews ©⁷² 2006-08-26 19:31:19 (1506 views)
  - Re: Let's try that again (url) - Ben 2007-12-17 13:40:46 (895 views)

All new video and photo upload section (url) (pic) - Laura B. ©⁶⁹ 2007-08-03 17:42:31 (1097 views) (1095 thread views)

Hey UMP, you done? With the garage, I mean. (nt) - Stan-Lee 2007-07-19 13:26:33 (692 views) (690 thread views)

First to post a picture of my stuff (pic) - Chuck ©¹⁰¹ 2006-06-13 10:21:13 (3453 views) (4143 thread views)
- Nice, a coat of paint and it will look pissa! (nt) - JimLev 2006-06-13 11:06:52 (1098 views)

Almost done..... (pic) - Useless Message Poster 2007-02-14 15:43:28 (3369 views) (11164 thread views)
- Ump, how do you like the Ultimate cabinets? - ///MJS 2007-03-15 14:39:37 (1245 views)
  - Re: Ump, how do you like the Ultimate cabinets? - Clancy 2007-05-14 11:31:47 (964 views)
  - Yes, for the money I think they're great. - Useless Message Poster 2007-03-19 14:18:55 (1107 views)
    - Thanks! (nt) - ///MJS 2007-03-19 14:47:36 (835 views)
- lol, love the fukkin urinal. (nt) - Jeff * 98NY 2007-03-13 21:20:21 (1177 views)
- P-car guy till the end...Rumor has it you opened a - Philly's Stanley Blackwell 2007-03-08 06:57:11 (1121 views)
  - Church with dyno in back ?? I like it !!!! :-) (nt) - Useless Message Poster 2007-03-09 14:17:50 (835 views)
- Nice man corner! Is this really UMP??? (nt) - DerekB 2007-03-01 17:09:28 (946 views)
  - Yep, the Jelq master himself ! (nt) - Useless Message Poster 2007-03-09 14:16:43 (1146 views)
    - I had to quit; I was draggin on the ground! Where - DerekB 2007-03-09 17:48:51 (838 views)
      - I shoot anyone that comes within 100 yards of - Useless Message Poster 2007-03-19 14:21:25 (893 views)
        I'll wear a vest. No, you don't know me. I do - DerekB 2007-03-25 22:25:46 (826 views)
- nice work (nt) - RevHigh 2007-02-22 16:45:54 (805 views)
- Re: Almost done..... - hdunce 2007-02-20 21:52:42 (950 views)
  - I thought I was gonna do a 2-post... - Tomcat 2007-02-22 17:22:20 (973 views)
  - It bolts right to the floor. All you need is 5" - Useless Message Poster 2007-02-21 09:26:10 (966 views)
- (no subject) (nt) - 2007-02-14 15:47:24 (800 views)

T5 HO anybody? - yan 2007-05-12 03:12:40 (792 views) (792 thread views)

Best garage LIGHTING? - Carol 2006-06-21 23:25:06 (11421 views) (27905 thread views)
- I have 4 8' florescent HO lights - Jeff * 98NY 2006-07-27 08:04:00 (4051 views)
  - I heard florescent lights don't work in COLD - Jason 2007-04-16 01:43:55 (2466 views)
- Re: Best garage LIGHTING? - auminer 2006-06-24 23:46:09 (5159 views)
  - Re: Best garage LIGHTING? - Merle 2007-01-20 06:56:20 (2763 views)
- I heard (and use) halogens for "true lighting". - Tomcat 2006-06-23 13:37:09 (3361 views)
  - Re: I heard (and use) halogens for true lighting. (pic) - Tomcat 2006-06-26 11:10:49 (4241 views)
- Re: Best garage LIGHTING? (pic) - Steve 2006-06-22 11:46:53 (5803 views)
  - Re: Best garage LIGHTING? (url) (pic) - CK 2007-04-18 17:55:03 (4145 views)

new floor (pic) - Sammy 2006-08-08 09:46:58 (3389 views) (6034 thread views)
- Re: new floor - Sammy 2006-08-11 06:04:12 (1615 views)
  - Re: new floor - Jason 2007-04-16 01:48:36 (952 views)
- Re: new floor (what's the material)? - flexstar 2006-08-10 19:49:58 (1509 views)
- Nice floor... - Mark M 2006-08-09 14:36:31 (1692 views)

Opinions Wanted: Hoists ( 2, 4 Post, Mid-rise) - johnmpls 2007-04-09 18:49:52 (954 views) (1793 thread views)
- Re: Opinions Wanted: Hoists ( 2, 4 Post, Mid-rise) - Tomcat 2007-04-11 10:06:53 (1195 views)

Garage Door Relocation - arjog007 2007-02-07 12:07:35 (1142 views) (1640 thread views)
- Re: Garage Door Relocation - goatboy 2007-03-24 21:31:31 (829 views)

Need garage design help. (url) - DerekB 2007-03-09 10:58:51 (1098 views) (1639 thread views)
- Re: Need garage design help. - Tomcat 2007-03-12 15:02:01 (918 views)

Adding a carriage house to the compound...... - rob z8 2001 2007-02-15 17:41:04 (844 views) (2096 thread views)
- get an architect to produce plans so you know (pic) - RevHigh 2007-02-22 12:47:31 (1162 views)
- I think you're much better off with someone - Useless Message Poster 2007-02-16 08:39:03 (737 views)

Garage Envy (pic) - Boz ©⁵² 2006-12-05 15:22:08 (3177 views) (6439 thread views)
- Re: Garage Envy - hdunce 2007-02-20 21:28:59 (874 views)
- Re: Garage Envy - Tomcat 2006-12-06 09:59:39 (1052 views)
  - Re: Garage Envy - Boz ©⁵² 2006-12-06 15:42:12 (1068 views)
    - Re: Garage Envy - Tomcat 2006-12-08 08:32:53 (1269 views)
      - Question about Details... - Mark M 2006-12-12 13:28:56 (1089 views)
        Re: Question about Details... - Boz 2007-01-14 21:56:13 (932 views)

Attic Stairs - dcxdc8 2007-02-05 17:47:37 (989 views) (1446 thread views)
- Try Home Depot. (More) - Rob W 2007-02-07 16:28:55 (737 views)

Long Term Storage - Bm5 2007-01-08 02:09:18 (768 views) (769 thread views)

What do you think of concrete "stain" ? (nt) - Useless Message Poster 2006-11-21 13:24:34 (1168 views) (3442 thread views)
- Not too much...it did not hold up to wear... - Tomcat 2006-11-22 10:45:35 (1098 views)
  - Don't mistake concrete acid staining with epoxy (pic) - Dean 2006-12-25 14:28:21 (1459 views)
  - Thanks! It should be done soon. I will try - Useless Message Poster 2006-11-22 13:14:10 (1075 views)

I need a wireless GD open indicator to let me know - :) evil ©¹⁰¹ 2006-12-06 12:42:59 (863 views) (1687 thread views)
- if you have a burglar alarm, use one of its zones (nt) - Osama 2006-12-09 13:36:16 (690 views)
  - Great idea thanks but my carrier said the transmit - :) evil ©¹⁰¹ 2006-12-12 08:29:26 (740 views)

Derek Weaver service is great! - OKV8iT 2006-11-22 23:29:13 (1059 views) (1060 thread views)

New Barn and Cleaned up Garage. (pic) - JohnnyQuest 2006-06-28 20:26:45 (3716 views) (6892 thread views)
- Re: New Barn and Cleaned up Garage. - bimmerman55 2006-11-16 00:03:08 (897 views)
- Beautiful inside and out! Sooo jealous! (nt) - ash 2006-10-22 08:36:24 (935 views)
- Great pics, thanks! (nt) - Charlie R. ©¹⁶⁸ 2006-07-07 11:51:36 (957 views)
- NICE!!! (nt) - LandShark 2006-07-02 01:44:48 (866 views)
- Very nice ! (nt) - JackB1 ©⁹¹ 2006-07-01 07:45:35 (919 views)
- Very nice, love the lift and both garages! (nt) - JimLev 2006-06-29 08:26:06 (1093 views)
  - WOW! - kindlife ©⁶⁰ 2006-11-18 23:19:06 (812 views)

Racedeck flooring - Rhansen162 2006-10-24 17:57:04 (1379 views) (1923 thread views)
- Daughter is getting a new garage. - Colin Campbell 2006-11-11 22:38:56 (984 views)

Finally... new parts classifieds system replaces old system (url) - Charlie R. ©¹⁶⁸ 2006-10-31 11:36:34 (847 views) (843 thread views)

Using a friends livingroom as a garage. (url) (pic) - Breitner 2006-10-15 14:41:37 (1824 views) (1819 thread views)

perhaps the most "ultra" Garage (url) - Duckguy 2006-08-10 02:57:05 (2278 views) (3032 thread views)
- NO - tacky plastic cabinets and VCT flooring. - sayemthree 2006-08-20 02:37:03 (1285 views)

Garage lifts. Lets discuss.... - RevHigh 2006-08-03 08:19:27 (1647 views) (8736 thread views)
- U mean u r building a "car port"???? ;o) (nt) - ultamte 2006-08-10 15:21:33 (1460 views)
  - Oooooh, I can call it that for the county permit. (nt) - lol RevHigh 2006-08-14 11:23:43 (1019 views)
- Rev, there is a car repair garage in the next (m) - JimLev 2006-08-07 10:50:08 (1380 views)
  - that would be great! Thanks a lot! - RevHigh 2006-08-08 06:53:56 (1015 views)
    - Rev, here ya go, I posted it on the wrong forum (url) - JimLev 2006-08-17 08:33:07 (1117 views)
- My 2 cents.... (url) - TTBear ©⁹⁵ 2006-08-03 15:07:44 (1474 views)
  - thanks for the reply. - RevHigh 2006-08-04 11:19:14 (1058 views)
  - I love my Direct Lift! It is probably not an... - Tomcat 2006-08-04 09:25:42 (3155 views)

Thinking about using Rustoleum epoxy and - JohnBoy 2006-07-26 15:20:16 (2614 views) (4742 thread views)
- I used the Rustoleum Epoxy product last year - Dave S. 2006-07-27 12:33:46 (2100 views)
  - thanks, will add estra coats. (nt) - JohnBoy 2006-07-28 12:39:51 (1546 views)

Vroom Rooms - BusinessWeek article (url) (pic) - em3 2006-07-27 22:14:28 (1552 views) (1550 thread views)

Building my Garage when I return From Iraq - Joe 2006-07-23 10:24:27 (1155 views) (2537 thread views)
- Thanks for your service! (nt) - Tomcat 2006-07-27 13:04:48 (816 views)
- check out ..... - sayemthree 2006-07-23 21:50:13 (1030 views)
  - Re: check out ..... - Joe 2006-07-24 10:08:15 (874 views)

Thoughts about floors - Trex 2006-06-26 14:07:27 (1277 views) (3844 thread views)
- Valspar brand (Lowes) 2 part Epoxy!!! - Tomcat 2006-06-27 12:42:22 (2222 views)
  - Be careful...looks like Valspar is different NOW - Tomcat 2006-06-28 11:17:55 (1467 views)

What product is best for syn oil spill clean-ups? (nt) - 20ducks 2006-06-24 07:58:42 (861 views) (1760 thread views)
- Epoxy painted floor :-) (nt) - Tomcat 2006-06-26 11:08:14 (987 views)
  - ^---yes, wipe it up with a rag & then soap & water (nt) - JimLev 2006-06-27 16:37:40 (761 views)

1st here (nt) - some guy ©⁶³ 2006-06-12 23:23:17 (979 views) (2345 thread views)
- new here... - Featheredbowl 2006-06-25 21:46:18 (945 views)
- Re: 2nd (nt) - Goldy 2006-06-13 10:11:29 (930 views)
  - Re: 3rd (nt) - FredR ©¹⁰⁶ 2006-06-13 10:19:38 (868 views)

Pages: 1 2 - Older>>